JOAP - SANHUA

>>> sanhuaclimate.com 154 SANHUA PRODUCTCATALOGUE HTG SERIES Filter DrierswithReplaceable Core The capacities listed in the table 6 are rated at the maximum recommended pressure drop for permanent installation. Suction line Filter-Driers guarantees an acid removal and a drying capacity described in table 7: Table 7 Drying capacity is expressed during drying in: R22: EPD = 10 ppmW, corresponding dew point temperature is -50°C R134a: EPD = 50 ppmW, corresponding dew point temperature is -37°C R404A: EPD = 10 ppmW, corresponding dew point temperature is -40°C R407C: EPD = 10 ppmW, corresponding dew point temperature is -40°C Drying capacity: SH48-A30 1) Filter Type HTG-A48 HTG-A96 HTG-B44 HTG-B92 Number of cores 1 2 3 4 Acid Adsorption capacity (g) 3) 28,0 56,0 84,0 112,0 Refrigerant Evaporating Temp. (°C) 4) Moisture Absorption [gram H2O] R22/ R407C 2) -40,0 26,0 52,0 78,0 104,0 -20,0 18,0 36,3 54,0 72,0 4,4 11,0 22,0 32,0 43,0 R134a -30,0 43,0 86,0 129,0 172,0 -20,0 36,0 72,0 108,0 144,0 4,4 25,0 50,0 75,0 100,0 R404A / R507 -40,0 45,0 90,0 135,0 180,0 -20,0 28,0 56,0 84,0 112,0 4,4 18,0 36,0 54,0 72,0 R410A -40,0 40,0 80,0 120,0 160,0 -20,0 33,0 66,0 99,0 132,0 4,4 24,0 48,0 72,0 96,0 Note: 1. The data reported in the Table 2, 3, 6 and 7 are based on filter driers in a clean system at ideal conditions; with impurities accumulated in the filter, the capacity may decrease. 2. R407C data based on dew point conditions 3. Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number) 4. Standard Evaporating Temperature defined by ANSI.AHRI Standard 731 (SI)-2013 5. Standard Evaporating Temperature defined by ANSI.AHRI Standard 730 (I-P)-2013