E 1145 - JOAP

Page 12 of 16 Example of use 1 Mounting on heat exchanger in a liquid heat pump. I n this example the drive is cooled by being mounted on a heat circuit. This gives the benefit of reusing heat loss from the drive. It is however very important that sufficient circulation in the heat exchanger is ensured. The cold plate must be sufficient cooled at all times. Also the construction must be built to ensure no condensation fluids are able to get into the drive. SpeedControl 1145 Cold Plate is supplied with a metal shield. Example of use 2 Mounting in Chiller. SpeedControl 1145 may be cooled by air running through the heat pump. The construction must be build to ensure that sufficient airflow passes by the drive at all times for the air to cool the drive effectively. It is of most importance that the airflow flows in the direction of the cooling ridges on the heat sink of the drive. SpeedControl 1145 must be mounted ensuring it is never exposed to moist, condensation or the like. Air-flow must cool the SpeedControl 1145